Connecting two JBL speakers is very simple. All you need to do is pair them with each other and then connect them to the audio output of your device. I recommend using Bluetooth speakers for this purpose because it's faster than connecting via aux-in cable or 3.5mm cable.
Bluetooth
To connect your speakers to each other, you'll need the following:
A Bluetooth-enabled device (like an iPhone or Android phone) that can play music through two JBL speakers.
Your speakers' labels, which will be found on the back of each unit.
Connecting two JBL speakers with Bluetooth is the simplest way. Here is how to do it:
Connect the first speaker to your device using a 3.5mm audio cable (or else connect it directly).
Pair the second speaker with your phone, tablet or computer using Bluetooth and then start playing music from that source!
If you hear music, then you have successfully connected the first speaker to your device. If not, try restarting both devices and repeat the steps aboveIf you need to connect more than two speakers together, then you will need a wireless connection. To do this, simply connect the first speaker to your device using a 3.5mm audio cable (or else connect it directly). Then start playing music from that source!.
Step 1: Connect the first speaker to your device using a 3.5mm audio cable.
Connect the first speaker to your device using a 3.5mm audio cable.
Connect the other end of the cable to your device's headphone jack.
Turn on both devices, then turn on the first speaker and then check that it works by playing some music from Spotify or another app that you have installed on your phone or computer (or anything else).
Step 2: Hold down the Bluetooth button of your second speaker for around 5 seconds. It will turn on and show a blue light.
Now, switch on your second speaker by pressing the Bluetooth button. You will see a blue light appear on it and hear a sound from that speaker.
To get the most out of your JBL speakers with Bluetooth, you should know how to connect them to each other. Turn on both speakers and make sure they are connected to a power source. 2. Press the “pairing” button on both speakers until they blink in unison (about 1-2 seconds)The Bluetooth button on your second speaker will now be illuminated. Now press the Bluetooth button on your first speaker until you see a blue light appear..
Step 3: Go to your Bluetooth settings in your device and pair the two speakers.
Once you've paired your devices, the next step is to connect them via Bluetooth.
To connect two JBL speakers:
Open the app on your phone or tablet and select "Bluetooth" from the menu bar at the top of your screen.
Select "JBL Connect+" from this list (this will open up a new window with multiple options).
Select "Connected Speakers" from this list (if there's only one device listed here, then skip ahead).
Aux-In Cable
To connect two JBL speakers, you need a Y-cable. This cable has two parts: one end connects to the audio output of your device and another end connects to the aux-cables from each speaker.
To begin, unplug all devices from their power sources and place them on a flat surface (this will help with placement later). Then plug in both ends of your Y-cable into power strips or surge protectors that have been plugged in properly for safety reasons; make sure there's no exposed metal on either side—this could cause shorts between components if something spits out unexpectedly during playback! Finally, connect both ends of one speaker's aux cable into one end of its corresponding Y-cable before repeating this process for each remaining speaker until you have all four connecting points connected together!
To connect two JBL speakers via aux-in cable, you need to use a Y-cable like this one on Amazon
To connect two JBL speakers via aux-in cable, you need to use a Y-cable like this one on Amazon. Simply connect both the aux-cables from each speaker to the Y-cable and then connect it to the audio output of your device.
You can also use a male-male aux cable (M/M) if you want. If your speakers have different audio jacks, you may have to purchase an adapter for them or simply use a 9 V battery power supply unit instead of using an RCA cable.
3.5 mm cable
The 3.5 mm stereo cable is a standard audio cable that connects many devices, including speakers and headphones. It can also be used to connect two JBL speakers together for even better sound quality.
To begin, you'll need to purchase the right kind of cable for your device or speaker set—and it's probably best if you get one that matches them both (like a USB-A male plug on one end and a female BNC connector on the other). Then find an open patch bay somewhere in your house where they'll fit neatly together without getting in each other's way too much!
Conclusion
To connect two JBL speakers via aux-in cable, you need to use a Y-cable like this one on Amazon. Simply connect both the aux-cables from each speaker to the Y-cable and then connect it to the audio output of your device.
Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus Forbes Bus